I was one of those people that picked the wrong side in the hi-def DVD format wars. I purchased an HD DVD player add-on for my XBox 360.
Of course only a few months after I did, the war was over, Blu-ray won and NetFlix sent me a Dear Julie letter letting me know that they weren’t going to offer HD disks any longer. Since then, I’ve been dragging my feet to buy a Blu-ray player. Prices were more than I wanted to spend on one until now, with the NS-2BRDVD Blu-ray player. Insignia is house brand for electronics and usually offers a nice set of features for an equally nice price. Let’s check it out. The player has a shiny Black plastic front, with a Black metal case. The only buttons on the front are the power button, eject button and the 4-way playback control button.
Play high-definition media with this Insignia DVD player. It connects to your HDTV so that you can enjoy detailed content at up to 1080p, and it also plays DVDs with high-quality sound for effortless enjoyment. The included remote with this Insignia DVD player makes it simple to control closed captioning, sound and chapters.
The back panel has all the various connection points (click the thumbnail to see a larger view). The player can be connected to your TV with composite, component or HDMI cables. I opted for HDMI to get the best picture possible for my 1080i TV. You’ll also notice that there is a USB connector and an Ethernet connector. Both say they are for future use.
A firmware update makes the USB port available for displaying images and playing audio files through the player. At the time of this writing, the Ethernet port is still not supported. The remote is nothing extraordinary. It has all the necessary buttons, is light weight and comfortable to use. Click the thumbnail to see a bigger view.
When the player is powered up, it has a Blue LED display and Blue LEDs for power and the Blu-ray logo. The first thing that I noticed about the player once I put a disc in the drawer and closed it, was the noise. It makes noticeable shuttle and spinning up noises that my old Panasonic DVD player never did. After the disc loads and the movie is playing, I no longer hear the noises. Loading time for some of the DVDs that I’ve tested has felt pretty long to me. Upwards to a minute from the time the disc drawer closes to when you finally see video on the screen. It actually seemed a bit longer before I did a firmware update on it The firmware update also enables the USB port on the back of the player, so that you can put.jpg and.mp3 files on a flash drive to view / listen to them through your TV.
This feature is pretty basic, but it does work. I tested this player with several DVDs and once a movie is loaded up, this player is great as far as picture quality and audio quality. Granted, my 65″ Mitsubishi RPTV can only do 1080i, not 1080p. Also, my audio is only 5.1 surround sound with RCA cables, but to my ears and eyes, it’s much much nicer than regular non-Blu-ray discs. That said, you have to remember, that I’m a Blu-ray virgin, so I don’t have any other Blu-ray players to compare with this one. My only complaints about this player are that it’s slow loading DVDs and it seems to ignore me half the time when I press the disc eject button on the remote or the actual player. It will show the OPEN icon on the screen, but it doesn’t open the drawer.
I have usually power the player off and on again before it decides to obey me. Also, since the Ethernet port is not enabled, you can’t take advantage of BD-Live features on DVDs. Other than those issues, I’d be happy to recommend the Insignia NS-2BRDVD Blu-ray DVD player for thrifty folks. I think the Sony BDP 350 is a better buy ( got mine for $199 on sale at The Superstore ). And have seen it at that price from time to time.
Insignia Dvd Player Netflix
No problems with it, except it takes a while to load ( approx.45 sec. The up-conversion is fare, but my Toshiba HD 35 is much better in that area. I also went HD DVD, but I’m going to keep it, because it’s up-converting is, to me, is excellent on my Panasonic 1080p plasma. I think the Sony is a good buy, if you can get it on sale. Normal price for the player I seen is anywhere from $249 to $299 cnd. And for the Insignia, friends of mine that perchance it had the same problem and other problems, and returned it and went for Sony for a few dollars more. The difference in picture quality between Blu-ray and standard-definition DVD was very obvious.
But the difference is accentuated when you get the chance to flip back and forth between the two. Just as many owners of rear-projection DLP sets don’t notice that their picture is getting dimmer over time, many owners of standard-definition DVD players will be perfectly happy with the picture quality, and won’t notice what they’re missing, unless they have something better, such as Blu-ray, with which to compare it. I have this same Blu Ray player and haven’t had any major problems with it except for the slow loading.
I have been away at school for a while so I haven’t been buying new blu rays, but I was actually going to go buy Quantam of Solace soon. Have any of the people with these problems contacted Insignia to find out a reason for the glitch?
Also, Do the people with this problem have their players hooked into a working internet connection via the ethernet port? I feel like this could just be a software issue and there could be an update available to easily correct this. For anyone reading about this player that is thinking about purchasing it here is a little more information.
The first thing I looked for to help narrow down my selection was that the Blu Ray had some type of input that would allow me to upgrade the software via an ethernet or USB cord. This player has both and that is a big deal because when I was doing my research on what to look for in a Blu Ray that was the number one thing. Without this a user would be unable to ever update the software. And as others have already commented Blu Ray is still an evolving technology so I wouldn’t be surprised if there were updates coming out for years. The long and short of it is that if you don’t have any way to upgrade the software you could be stuck with a Blu Ray that has some bad issues just like not being able to play newer Blu Rays.
This is why I am interested as to whether the people having trouble with Quantam of Solace and The Day the Earth Stood still have ever connected for an update. The picture quality is great for it being such a cheap player. Unless you are planning on spending over a thousand dollars on a top-of-the-line Blu Ray you will probably get similar results from most of the less expensive Blu Ray players. Insignia is best buys house brand. This means that best buy pays a company ( I believe it is LG but i’m not 100% on that) to make different electronics for them and stamp it with the insignia brand. On best buys part this is a great idea to help increase profits.
I have a 42 inch insignia LCD that is 1080P. I got it for far less than any other 1080P tv’s that were the same size. I have had it for over a year now and still have never had a problem with it. However, one of my friends got an insignia receiver for his birthday less than 4 months ago and it has already been replaced twice. As far as this Blu Ray player goes there seem to be some minor inconveniences but nothing that actually affects the picture or sound quality. (I wouldn’t go waste my money on an insignia receiver though they seem to be about the only thing insignia puts out that has lots of problems) The loading speed once you turn on the Blu Ray player can take 15-20 seconds before you can even open the disc tray.
This can be annoying but not enough that I would tell someone to buy a different player that could very well have the same issue. My only other complaint about the player in question is that without the remote it is about as useful as a coaster. There are only 3 buttons on the device itself. Power, Eject, and a larger button that has stop, rewind, fast forward, play/pause (just like an ipod). When I bought it I thought I wouldn’t have any problems since there was a play button right on the player, however, when you put a disc in and get to the main menu you have to hit “enter” on the remote. Hitting play on the player wont do anything.
This is a big problem for me because I just realized I lost the remote for it before I went back to school this spring. In the end based on price, picture quality, and overall ease of use I would rate this player an 8 out of 10.
But, if this model won’t play newer Blu Rays and this is not an issue that can be fixed with a software update then I would advise you to try and find another comparable Blu Ray. No matter what Blu Ray or any other type of expensive electronics you invest in make sure you do your research before you buy. Don’t expect to go into a store thinking the employees will find the right thing for you. Know what features you want and what you don’t care about. In the spirit of full disclosure, here is an update. Insignia finally sent me a software update, and it seems to have worked.
I have not found any Blu-ray discs that it will not play, although it does take a very long time for some of them to load. That being said, if a company knows that there is a problem with a specific unit, they should AT A MINIMUM cut a software update disc and slip it into the box BEFORE it is purchased.
The customer should not have to go searching and complaining to get the fix. I wonder how many people who just wanted a blu-ray player and are not computer savy, purchased this product and now have a ‘lemon’ on their hands, not knowing that there is a fix available. Terrible customer service.
Got this blu ray player about a year ago because it was the cheapest out there at the time that had an optical digital output. I have a Logitech z5500 5.1 system with dolby didital and dts decoders.
I was extremely impressed with the sound quality that blu ray affords. The jump in quality from dvd sound to blu ray sound is unmistakeable with my system. Soon found out that the player would not play certain blu rays like the aforementioned Quantum of Solace. I have noticed that ones that don’t work are published by MGM studios such as Valkyrie.
Some published by Fox r iffy. Anyway, i waited awhile before finally goin to the Insignia website to download the firmware upgrade. Now i don’t have problems playing anything. BUT, now i have a new problem – I can’t get digital soundtracks to play through the either the coax or optical digital outputs.
I basically get an analog signal and the receiver goes to pro logic II mode which is basically the sound quality of a dvd using red and white stereo cables. I’ve called Insignia customer support and told them what happened after applying the update and they gave me a bunch of bs that the firmware (june 2009) was not the latest version and they were having trouble uploading the newest version to their site or something like that. So they sent me a firmware upgrade disc in the mail and it was the exact same version that i had downloaded from their website. Called them back. Did not solve the problem and they said i would have to take it to Best Buy which is and hour away from where i live. If they don’t replace it, then they may have to ship it out for repair or whatever which they may try to charge me for. I doubt they will be able to help me in store and send me home unless they just furnish me a new model that doesn’t suck.
Insignia Dvd Player Support
Its not just this brand that seems to have problems with the bluray format, but the sound issue really pisses me off. I have heard also that some Insignia hdtvs continuously blow power supplies. So bottom line, don’t trust this shit brand. You get what u pay for and u pay for what u get. I have the same model bluray player. It was originally in the family room, but when we moved my parents bought a few new ones so I got to take this one.
I’ve noticed the same problems as mentioned, when I try to eject a disc it takes a few minutes and a lot of pushing the eject button to get the player to eject a disc. Also it makes a fair amount of noise when it first loads and reads the disc. Also I’ve noticed that depending on which type of disc I’m playing the player takes a considerable amount of time to read certain discs, especially the new bluray discs as opposed to the older bluray discs or the regular DVDs. I didn’t know that you could update the firmware until very recently, so I’m going to do that in hopes that maybe some of these problems will get better or stop completely. I know that is wishful thinking but it’s worth a shot.
Update your player directly by ethernet not wifi in your home. Brought mine at a yard sale foe twenty dollars. My player didnt contain bd live and other features. Took it to best buy, tech had a hard time finding firmware but alas found it and now my player works like a champ. Contains features that it never once had. Tech said i didnt owe him nothing, maybe because it was Sunday. Disc player had the same problems you guys have now works like a charm.
That guy at that yard sale is going to be very angry when he found out that his insignia player only needed to be updated.